Tile calculator
Estimate tiles including waste.
ProofPath
Organize consumer cases, receipts, photos, notes, reminders, reports and supporting evidence.
Common questions
Should I buy extra tiles?
Plan for cuts, breakage and future repairs. Your waste allowance depends on the tile pattern and room shape.
Can I change the tile size?
Yes. Enter the tile dimensions you intend to use and check that the selected measurement units match your room measurements.
How the tile calculator works
The calculator turns a rectangular floor and a tile size into a whole number of tiles. Enter Floor length and Floor width (meters or feet, using the unit menu beside each label), the Tile length and Tile width (centimeters or inches) and a Waste allowance (%). It multiplies floor length by width, adds the waste percentage, divides by the area of one tile and rounds up to the next whole tile. Switching a unit menu converts the number already in that field.
With the starting values, a 5 m × 4 m floor is 20 m². A 30 cm × 30 cm tile covers 0.09 m². Adding 10% waste gives 20 × 1.10 = 22 m², and 22 ÷ 0.09 = 244.4, which rounds up to 245 tiles. A 3.6 m × 2.4 m floor with 60 cm × 30 cm tiles and 10% waste is 8.64 m²; 8.64 × 1.10 ÷ 0.18 = 52.8, so 53 tiles. With 0% waste the starting floor needs 223 tiles (222.2 rounded up). The line under the result shows the floor area before waste.
The result counts whole tiles by area only. It does not subtract doorways, fixtures or alcoves, and it does not know about layout. To allow for grout joints, enter the tile size plus the joint width (for example 30.3 cm for a 30 cm tile with a 3 mm joint). For an L-shaped room, calculate each rectangle separately and add the counts; each result is rounded up, so the sum can be a tile or two high. Raise the waste figure for diagonal layouts, patterned tile or many cuts, and check box coverage and the manufacturer’s advice before you buy.