Roof area calculator
Estimate the surface area of a simple two-plane gable roof from the building footprint, roof pitch and overhang.
ProofPath
Organize consumer cases, receipts, photos, notes, reminders, reports and supporting evidence.
How the roof area calculator works
Enter the building length and width in feet, the roof rise per 12 inches of run, and an overhang allowance as a percentage. The calculator estimates the sloped roof area and shows it in roofing squares.
A 40 ft by 30 ft building with a 6 in 12 pitch and 5% overhang has a 1,260 sq ft footprint including overhang, and a roof area of about 1,409 sq ft, or 14.1 roofing squares before waste.
This is a simple two-plane gable roof estimate. Hips, valleys, dormers and complex shapes need an on-site measurement.
Common questions
How is the roof area calculated?
The footprint (length times width) is increased by the overhang percentage, then multiplied by a slope factor: the square root of 12 squared plus the rise squared, divided by 12. A steeper pitch gives a larger factor.
What does pitch mean here?
Pitch is the rise in inches for every 12 inches of horizontal run. A 6 in 12 roof has a slope factor of about 1.118, so it has roughly 12% more surface than its footprint.
What is a roofing square?
A roofing square covers 100 square feet. The calculator shows the area in squares before any allowance for waste, which you should add when ordering materials.
Which roofs does it not cover?
Hips, valleys, dormers and other complex shapes are not modeled. For those, or before ordering materials, measure on site.