Rainwater harvest calculator
Estimate how many liters a roof can collect from a given amount of rainfall.
How the rainwater harvest calculator works
Enter the roof area that drains to your collection point, the rainfall over the period you are interested in, and a collection efficiency to allow for losses. The result is the volume collected.
One millimeter of rain on one square meter is one liter. A 50 square meter roof in 20 mm of rain catches 1,000 liters before losses; at 80% efficiency that is 800 liters.
This is an estimate for sizing a tank. Local rules and water-safety requirements may apply to storing and using collected rainwater.
Common questions
How is the collected volume calculated?
Roof area in square meters times rainfall in millimeters gives liters before losses, because 1 mm of rain on 1 m² is 1 liter. That figure is then multiplied by the collection efficiency.
What efficiency should I use?
The default is 80%. Losses come from splash, first-flush diversion, leaks and evaporation, so the right value depends on your gutters and roof surface. It cannot exceed 100%.
Which roof area do I enter?
Only the area that drains to your collection point. The calculator treats the number you enter as the collection area and does not adjust it for slope.
Is the water safe to use?
The calculator does not assess water quality. Local rules and water-safety requirements may apply to storing and using collected rainwater.